Name: Stainless Steel Laboratory Table
Brand: YEKGLOBAL
SKU: 30

Question 1

In which applications is YEK-SSTABLE1500 stainless steel laboratory table used?

Accepted Answer

YEK-SSTABLE1500 is a hygienic work table measuring 1500x750x850 mm (±30 mm adjustable height), manufactured entirely from AISI 304 stainless steel. Ideal for food microbiology laboratories (pathogen analysis, hygiene tests), pharmaceutical production sites (GMP-compliant clean rooms), hospital laboratories (clinical microbiology, pathology), cosmetic production, biotechnology and molecular biology laboratories. FDA-approved material poses no contamination risk. Antibacterial property prevents bacterial proliferation. Easily sterilizable surface required for aseptic work.

Question 2

What are the properties of AISI 304 stainless steel material?

Accepted Answer

AISI 304 (18/10 Cr-Ni) stainless steel used in YEK-SSTABLE1500 contains 18% chromium and 10% nickel. Chromium creates oxide protective layer on surface providing corrosion resistance. Nickel provides extra protection and brightness in acidic environments. 1.5 mm wall thickness offers high strength and long life. Satin 2B surface finish (Ra < 0.8 µm) shows fingerprint and stain resistance. Maintains dimensional stability between -40°C and +400°C. Non-magnetic structure does not affect sensitive measuring instruments. 100% recyclable and environmentally friendly.

Question 3

How is cleaning and maintenance of stainless steel table performed?

Accepted Answer

YEK-SSTABLE1500 daily cleaning: wiping with soft microfiber cloth and neutral pH detergent solution (soapy water), then rinsing with clean water and drying with dry cloth. Weekly deep cleaning: disinfection with 70% ethanol or isopropanol, treatment with stainless steel cleaner or oxalic acid solution (5%) if rust stains occur. DO NOTs: using chlorinated cleaning agents (bleach) causes pitting corrosion, using abrasive wire sponges or sandpaper scratches surface, allowing acidic or basic chemicals to contact for long periods. In annual professional maintenance, welding points are checked and passivation treatment can be applied.

Question 4

What are the load capacity and stability features of stainless steel table legs?

Accepted Answer

YEK-SSTABLE1500 has 50x50 mm square profile stainless steel legs. Each leg has 150 kg load capacity (total 600 kg static load). Cross support bars between legs prevent lateral movement and provide seismic resistance. Adjustable plastic glides at bottom (HDPE material) compensate floor irregularities within ±30 mm range. Leg design is open and accessible to facilitate laboratory floor cleaning. All welding points are made with TIG (Tungsten Inert Gas) welding and receive smooth surface treatment. Stainless steel structure is not damaged when chemical liquids spill on legs.

Question 5

What are the differences between stainless steel table and epoxy resin table?

Accepted Answer

Differences between YEK-SSTABLE1500 (stainless steel) and YEK-BENCHTOP (epoxy resin): Hygiene: Stainless steel 100% non-porous and antibacterial, epoxy resin is micro-porous. Heat resistance: Stainless steel continuous 400°C, epoxy short-term 1000°C (but >100°C long-term not recommended). Chemical resistance: Epoxy superior to acid/base/solvent, stainless steel sensitive to concentrated chlorides. Mechanical strength: Stainless steel more resistant to scratching and impact. Price: Stainless steel typically 30-50% more expensive. Maintenance: Stainless steel requires less maintenance. Selection criteria: Choose stainless if sterility and hygiene are priorities, epoxy if heavy chemical use.

Question 6

Which standards and certifications does stainless steel laboratory table have?

Accepted Answer

YEK-SSTABLE1500 complies with food and pharmaceutical industry standards: FDA 21 CFR 177.2600 (Food Contact Materials), NSF/ANSI 2 (Food Equipment), ASTM A240 (Standard for Stainless Steel Sheets), DIN 1.4301 / EN 10088-2 (European stainless steel standard), ISO 9001 (Quality Management System), GMP (Good Manufacturing Practice), CE marking (European conformity). Material certificate (Mill Certificate 3.1) provided with each product. Appropriate documentation available for use in accredited laboratories (ISO/IEC 17025) and GLP-compliant facilities. RoHS and REACH compliant, no heavy metals.

Stainless Steel Laboratory Table

Product Description

Full Stainless Steel Construction

Medical and Food Compliance

Satin Finish Surface

Heavy-Duty Legs

Technical Specifications

Technical Specifications

Product Information

Frequently Asked Questions About Stainless Steel Laboratory Table