Name: Oxygen Bomb Calorimeter (YEK-306)
Brand: YEKGLOBAL
SKU: 56

Question 1

What is YEK306 Oxygen Bomb Calorimeter and what is it used for?

Accepted Answer

The YEK306 Oxygen Bomb Calorimeter is a precision laboratory instrument that measures the calorific value (heat of combustion) of solid and liquid fuels. It is used to determine the energy content of coal, biomass, petroleum products, plastics, and other combustible materials. Widely preferred in thermal power plants, mining operations, cement plants, university laboratories, and quality control departments for accurate energy value determination.

Question 2

What are the technical specifications and measurement range of YEK306 Calorimeter?

Accepted Answer

YEK306 is an automatic bomb calorimeter operating on the isoperibol principle. The measurement range is 0-40,000 J/g with an accuracy of ±0.1%. The device complies with ISO 1928, ASTM D5865, DIN 51900, and GB/T 213 standards. With automatic water filling, temperature control, and software integration, it provides fast results. A typical measurement takes approximately 10-15 minutes.

Question 3

In which industries and applications is YEK306 Calorimeter used?

Accepted Answer

YEK306 Calorimeter has wide application areas in energy, mining, cement, chemical, and research laboratories. It is preferred for coal quality control in thermal power plants, production planning in mines, alternative fuel evaluation in cement plants, academic research in universities, and sample analysis in accredited laboratories. It is also used for determining the energy value of biomass, waste-derived fuels, and synthetic materials.

Question 4

What consumables and accessories are required for YEK306 Calorimeter?

Accepted Answer

For regular operation of YEK306 Calorimeter, the following consumables are needed: bomb calorimeter crucibles, ignition wire (nichrome or cotton thread), oxygen gas (high purity), benzoic acid standard (for calibration), silicone seals and gaskets, cleaning brushes, and distilled water. These consumables should be regularly supplied and original or approved products should be used to maintain device performance. YEKLAB supplies all consumables.

Question 5

How is YEK306 Calorimeter calibrated and what are the maintenance requirements?

Accepted Answer

YEK306 Calorimeter is calibrated using benzoic acid standard. Calibration should be performed at regular intervals (typically monthly or every 100 measurements) to verify device accuracy and ensure measurement reliability. Daily maintenance includes water vessel cleaning, bomb interior inspection, and seal replacement. Annual periodic maintenance includes electronic calibration, software updates, and system checks. YEKLAB provides post-installation training and technical support.

Question 6

Which standards do YEK306 Calorimeter measurement results comply with?

Accepted Answer

YEK306 Calorimeter performs measurements in full compliance with internationally recognized standards such as ISO 1928 (determination of calorific value for solid fuels), ASTM D5865 (for coal and coke), DIN 51900 (German standard), and GB/T 213 (Chinese national standard). This compliance ensures that measurement results are valid in accredited laboratories, international trade, and quality certifications. The device software performs automatic calculation and reporting according to standards.

Question 7

What types of samples can be analyzed with YEK306 Calorimeter?

Accepted Answer

A wide variety of solid and liquid samples can be analyzed with YEK306: hard coal, lignite, anthracite, coke, peat, wood pellets, agricultural waste (straw, husks), liquid fuels (fuel oil, diesel, biodiesel), plastic and polymer waste, synthetic materials, chemical products, paper and cardboard, RDF (refuse-derived fuel), and food products. The physical form of the sample (powder, granule, pellet, liquid) is suitable for measurement. Taking homogeneous and representative samples is critical for accurate results.

Question 8

How does the YEK306 Calorimeter purchase and delivery process work?

Accepted Answer

The YEK306 Calorimeter procurement process begins with a quotation request. YEKLAB technical team evaluates your needs and provides a detailed quotation and product brochure. After order confirmation, the device is supplied from the manufacturer or authorized distributor. Delivery time is typically 4-8 weeks. The device is delivered with professional installation and user training. Warranty coverage, consumables supply support, and technical service are included in the package. Payment terms can be flexibly arranged.

Oxygen Bomb Calorimeter (YEK-306)

Product Description

Precise Calorific Value Determination

Fully Automatic System

ASTM & ISO Compliance

Applications

Technical Specifications

Product Information

Frequently Asked Questions About YEK306 Oxygen Bomb Calorimeter